How to Install Salto Security Systems
Table Of Contents
How Do You Install a Salto Security System?
You install a Salto security system by mounting the electronic lock, wiring the controller, connecting the encoder and setting up the access software. The process starts with a site survey of every door. The survey records door thickness, lock type and cable routes. The installer then removes the existing lockset from each door. The Salto escutcheon plates replace the old hardware on both door faces. The installer drills a cable hole through the door for the wiring harness. The wiring harness links the Salto lock to the door position switch and the power supply. The installer secures the lock with the supplied screws and tests the handle movement. The final step connects the system to the server and registers each lock in the software database.
The installation of a Salto security system follows a fixed sequence that protects the warranty. A licensed security technician performs the electrical connections under Western Australian regulations. The technician isolates the power supply before touching any wiring. The technician mounts the Salto controller inside the door frame or a nearby ceiling void. The controller communicates with the locks through an encrypted data line. The technician pairs each lock with the controller and confirms the signal strength. The technician then issues a test credential through the encoder. The test credential opens the door and records an audit event in the software. The technician reviews the audit event and signs off the installation. The sign-off activates the manufacturer warranty on every Salto component.
Which Salto Components Need Installation First?
The Salto components that need installation first are the door locks, the encoders and the network controllers. The locks form the physical layer of the access control system. The installer fits one Salto lock per door and labels each lock with a door number. The labels match the door schedule in the software. The encoder sits at the administration desk and writes credentials. The installer connects the encoder to a computer through a USB cable. The network controller links the locks to the management software. The installer mounts the controller in a secure comms room. The controller needs a mains power point and a data connection.
The installation order matters because each Salto component depends on the previous layer. The locks operate independently once the installer sets the initial configuration. The encoder issues the configuration cards that program each lock. The controller receives audit data from the locks during scheduled updates. The installer tests the locks before connecting the controller. The test confirms the latch, the handle and the battery pack work correctly. The battery pack powers the lock for years of standalone operation. The installer inserts fresh batteries and checks the low-battery indicator. The completed lock joins the system database with a unique identifier. The identifier allows the software to track every credential event.
What Tools Does a Salto Installation Require?
A Salto installation requires a drill, hole saws, a screwdriver set, a cable fish tape, a multimeter and a laptop. The drill and the hole saws cut the lock spindle hole and the cable route through the door. The screwdriver set handles the escutcheon screws and the strike plate fixings. The cable fish tape pulls the wiring harness through wall cavities and ceiling spaces. The multimeter tests the voltage at the controller and the door loops. The laptop runs the Salto management software during commissioning. The installer also carries a door thickness gauge and a template card.
The installer adds specialist items to the basic tool list. The template card marks the exact drilling positions for each Salto lock model. The door thickness gauge confirms the lock fits the leaf before any cutting starts. The installer uses a chisel to recess the strike plate into the door frame. The installer uses a level to keep the escutcheon plates square. The software commissioning stage needs the system licence key and the network settings. The installer records the lock identifiers and the door names in a commissioning sheet. The commissioning sheet becomes the reference document for future maintenance visits.
How Long Does a Salto System Installation Take?
A Salto system installation takes between one and two hours per standard door. A single office door with a battery-powered lock fits inside the shorter window. A glass door or a fire door adds preparation time to the schedule. A wired lock with a door loop takes longer than a battery lock. A large site with twenty doors spreads the work across several days. The installer usually completes the physical fitting first and returns for commissioning. The commissioning visit covers the software setup and the credential testing.
The duration of a Salto system installation depends on the door count, the lock type and the site conditions. A masonry wall between the controller and the lock extends the cable route. A heritage door needs careful drilling to protect the timber finish. A site with an existing access control system needs a changeover plan. The changeover plan keeps the doors secure during the swap. The installer fits each new lock outside business hours on occupied sites. The software enrolment of fifty credentials adds about an hour to the project. The final walkthrough with the client closes out the schedule.
Salto Door Hardware Installation Steps
The Salto door hardware installation steps cover marking, drilling, fitting the lock and adjusting the strike. The installer tapes the template card to the door face at the correct handle height. The template marks the spindle hole, the cable hole and the fixing points. The installer drills the spindle hole with a hole saw and checks the diameter against the specifications. The installer drills the cable hole through the door edge at a slight angle. The installer deburs every hole before fitting the hardware. Clean holes protect the wiring harness from abrasion.
The hardware fitting follows the drilling stage on every door. The installer passes the wiring harness through the cable hole and connects the harness to the lock. The installer seats the inner escutcheon and the outer escutcheon on opposite door faces. The fixing screws clamp the escutcheons together and hold the lock rigid. The installer fits the spindle through the lock body and attaches the handles. The installer chisels the frame and screws the strike plate into position. The installer closes the door and checks the latch alignment. A misaligned strike causes drag on the latch bolt. The installer adjusts the strike position until the door latches smoothly.
How Do You Program Salto Locks After Installation?
You program Salto locks after installation by writing configuration cards at the encoder and presenting the cards to each lock. The encoder writes the door number, the timezone plan and the audit settings onto a configuration card. The installer presents the configuration card to the lock reader. The lock accepts the card and stores the configuration in the internal memory. The installer repeats the process for every door on the site. The installer then writes an installer card to set the master key hierarchy. The master hierarchy defines which credentials open which doors.
The programming stage continues with credential issuing and testing. The administrator enrols user credentials in the Salto management software. The software assigns access rights, time zones and expiry dates to each credential. The encoder writes the access rights onto key cards, fobs or phone credentials. The installer presents a test credential at each door and confirms the reader light sequence. The lock stores the credential event in the audit trail. The controller collects the audit trail during the next data update. The administrator reviews the audit data in the software and confirms the system works end to end.
FAQS
Do Salto locks need a power supply at every door?
Battery-powered Salto locks run on an internal battery pack, so a battery lock needs no door wiring. Wired Salto locks draw power from the controller through a door loop. The choice between battery and wired power depends on the door type, the traffic level and the audit requirements of the site.
Can existing doors take a Salto electronic lock?
Most timber and metal doors accept a Salto electronic lock with standard drilling. The installer checks the door thickness, the lock edge distance and the frame condition before starting. Glass doors and fire doors need model-specific kits. A pre-installation survey confirms every door suits the chosen lock.
Who carries out a Salto installation in Perth?
A licensed security installer carries out a Salto installation on commercial and residential doors. The licence covers the wiring, the controller connections and the commissioning work. The installer also holds factory training on the Salto software. Homeowners and business owners book a site survey before any fitting starts.
What happens to the old lock after a Salto installation?
The installer removes the old lockset, the strike plate and the cylinder during the changeover. The old hardware stays with the property owner unless the owner asks for disposal. The installer fills any oversized holes with a matching plate. The new Salto escutcheons cover the standard drilling marks on most doors.
How do Salto locks stay secure after installation?
Salto locks stay secure after installation through encrypted communication. Salto locks use encrypted communication between the credential, the Salto lock, and the Salto controller. Each credential carries a unique key. The Salto software manages the unique key. The Salto software cancels lost credentials. The next update removes access rights from the Salto lock. The audit trail records every entry attempt. The audit trail records the entry attempt against the credential holder.
Related Links
Understanding the Importance of Salto InstallationCommon Causes of Installation Issues with Salto Systems
Signs You Need Salto System Installation
Benefits of Professional Salto Installation in Perth
The Cost of Salto System Installation: What to Expect