What to Expect During a Salto System Audit
Table Of Contents
What Happens During a Salto System Audit?
A Salto system audit is a structured inspection of an electronic access control system. The auditor examines every door controller, reader, credential and lock on the site. The auditor tests each reader against a sample of access cards or mobile keys. The auditor checks door positions, release times and exit devices against the documented access plan. The auditor reviews the software database and compares user records against current staff and tenant lists. The auditor logs every fault, mismatch and outdated permission in a written record. The auditor then walks the owner through each finding in plain language. A Salto system audit finishes with a prioritised list of corrective actions. The owner receives clear next steps, ranked by risk. The whole process gives the owner a truthful picture of the system's health.
The Salto system audit also covers physical security around each access point. The auditor inspects door closers, hinges, frames and cable routes for damage or tampering. The auditor verifies emergency egress paths remain clear and fail-safe hardware behaves correctly during a power test. The auditor confirms battery levels on wireless locks and notes units approaching end of life. The auditor checks firmware versions on controllers and readers against the manufacturer's current release. Older firmware versions carry known faults, so the auditor flags every outdated unit for an update. The auditor photographs hardware faults and attaches the photos to the written record. The owner then holds evidence for insurance, compliance and warranty purposes. A thorough audit leaves no access point unexamined and no fault undocumented.
How Long Does a Salto System Audit Take?
A Salto system audit takes between half a day and three working days. The audit duration depends on the number of doors, readers and credentials on the site. A small office with ten doors needs a single half-day visit. A multi-storey building with eighty doors needs two or three full days on site. The auditor adds time for software database review, because user records often outnumber physical doors. A site with two thousand active credentials needs several hours of database work alone. The auditor provides a time estimate before the visit, based on the door count and system history. The owner receives a firm schedule, so staff disruption stays minimal. Audits outside business hours remain an option for busy premises. The auditor confirms the final duration after the initial walk-through.
The Salto system audit schedule includes time for testing, not just inspection. The auditor tests a representative sample of credentials on every reader type. The auditor triggers power-fail simulations on selected doors to confirm fail-safe behaviour. The auditor waits for lock response times and records any delay past the manufacturer's specification. Wireless locks need a signal survey, and the auditor maps signal strength at each door position. Weak signal zones extend the audit by an hour or more per floor. The auditor reserves the final hour for a findings discussion with the owner or building manager. The discussion covers urgent faults, moderate faults and routine maintenance items. The owner leaves the discussion knowing exactly what the audit found and what happens next.
Which Checks Form Part of a Salto System Audit?
A Salto system audit includes hardware checks, software checks and credential checks. Hardware checks cover readers, controllers, locks, door contacts and power supplies. The auditor tests every reader for correct card detection and LED feedback. The auditor measures lock response times against the manufacturer's stated specification. The auditor inspects power supplies for correct voltage output and secure connections. Software checks cover the access management database, user permissions, time zones and access groups. The auditor compares each user record against a current staff or tenant list. The auditor finds departed staff holding live credentials, a common audit finding. Credential checks cover card stock, mobile key enrolments and visitor passes. The auditor counts active credentials and matches the count against the authorised register. Every check produces a written result in the audit report.
The Salto system audit adds security policy checks to the technical checks. The auditor reviews the documented access policy against the live system configuration. The auditor finds doors granting access outside approved hours, a frequent policy breach. The auditor checks audit trail settings, because the system needs trail logging enabled on every door. Disabled trail logging hides unauthorised entry attempts from the owner. The auditor verifies anti-passback rules, dual-authority settings and holiday calendars against the written policy. The auditor tests a sample of emergency override procedures, including master code handling. The auditor confirms backup procedures produce a restorable copy of the database. The auditor checks communication links between controllers and the server for stability. Each policy check receives a pass or fail mark in the final report.
What Reports Follow a Salto System Audit?
What reports follow a Salto system audit? A Salto system audit produces a written report within five business days. The report opens with an executive summary. The summary rates the system against a traffic-light scale, green through red. The report body lists every finding under a numbered heading. Photos attach to findings where relevant. Each finding carries a risk rating: low, medium, or high. High-risk findings include failed emergency exits, live credentials for departed staff, and disabled trail logging. The report lists each finding's recommended fix. The report lists the responsible party. The report lists a suggested timeframe. The report closes with an appendix of test results. The appendix includes firmware versions. The appendix includes credential counts. The owner receives the report in a printable format. The report is ready for insurers. The report is ready for building managers. The report becomes the baseline record for the next scheduled audit.
The Salto system audit report also includes a corrective action plan. The action plan orders every finding by risk, with the highest risk first. Each action lists the estimated labour time, so the owner understands the workload involved. The plan separates urgent fixes from routine maintenance items, and the owner schedules accordingly. Urgent fixes include door hardware faults, failed power supplies and permission errors on sensitive doors. Routine items include firmware updates, battery replacements and database clean-ups. The report includes a recommended re-audit date, typically twelve months after the current audit. High-traffic sites such as childcare centres or clinics need a six-month re-audit cycle. The auditor offers a follow-up call to discuss the report line by line. The owner keeps the report on file as evidence of due diligence.
How Should You Prepare for a Salto System Audit?
You should prepare for a Salto system audit with documents, access and staff notice. The auditor needs the current access policy, the credential register and the floor plans. The auditor needs administrator login details for the access management software. The auditor needs keys or supervised access to every riser, plant room and ceiling space containing controllers. The auditor needs a staff or tenant list dated within the past month. The owner gathers these documents before the audit date, so the visit starts productively. The owner notifies security staff, reception and facility managers about the scheduled visit. The owner arranges car parking and site induction for the auditor where required. Preparation of one hour saves several hours of audit time. A well-prepared site receives a more accurate and faster audit.
You should prepare the physical site for a Salto system audit as well. The owner clears stored goods away from access points, because blocked doors hide hardware faults. The owner replaces obviously dead batteries beforehand, so the audit focuses on hidden faults instead. The owner flags any doors already known to play up, and the auditor tests those doors first. The owner secures pets, vehicles and stock away from test doors during the audit. The owner nominates one staff member as the audit contact for the day. The contact answers questions about access habits, past faults and recent changes. The owner schedules the audit away from peak traffic periods, deliveries and events. The auditor works faster on a quiet site. Good preparation produces a cleaner, more useful audit result.
Who Performs a Salto System Audit?
A Salto system audit is performed by a licensed security technician with Salto training. The technician holds an electrical or security licence issued under Western Australian law. The technician completes manufacturer training on Salto hardware and software platforms. The technician carries test equipment, including a multimeter, a credential reader tester and a laptop. The technician needs current software access, so the technician requests administrator rights before the visit. An untrained general electrician lacks the software knowledge a proper audit demands. The owner verifies the technician's licence and Salto training before booking. A qualified technician insures the work and stands behind the findings. The technician remains the single point of contact from booking through to the final report.
The Salto system audit team sometimes includes a second technician on larger sites. A two-person team splits the work, one technician tests hardware while the other reviews the database. The team lead presents the findings and answers the owner's questions at the close of the audit. The owner chooses a local technician, because local availability shortens repair times after the audit. A local technician sources spare readers, locks and power supplies from nearby suppliers. The owner asks about the technician's audit experience during the booking call. An experienced technician completes a twenty-door audit in half the time of a newcomer. The technician provides references from comparable sites on request. The right technician turns the audit into a working maintenance plan.
FAQS
How often should a Salto system audit be booked?
A Salto system audit should be booked every twelve months on most sites. High-traffic sites such as clinics, schools and childcare centres need a six-month cycle. You should also book an audit after a security incident, a major staff turnover or a building extension. The last audit report states the recommended re-audit date.
Will the audit interrupt daily operations?
The audit causes minimal interruption on a prepared site. The technician tests one door at a time and keeps traffic moving around the work. The database review happens away from the doors, usually in a plant room or office. Audits outside business hours remain available for sites with strict operating schedules.
Does the audit cover mobile keys as well as cards?
The audit covers mobile keys as well as cards. The technician audits every credential type on the system. The technician tests a sample of mobile keys against each reader model. The technician checks the mobile key platform for correct enrolment. The technician verifies mobile key revocation. The technician confirms mobile key expiry behaviour.
What happens if the audit finds a serious fault?
What happens if the audit finds a serious fault? The audit finds a serious fault. The technician flags serious faults during the visit. The technician addresses a failed emergency exit immediately. The technician addresses a live credential for a departed staff member immediately. The technician secures the fault on the spot where possible. The written report documents the fault. The written report documents the fix applied. The written report documents any follow-up work needed.
Can the audit help with insurance or compliance?
The audit report serves as evidence of due diligence for insurers and building compliance. The report records the system condition, the faults found and the corrective actions taken. Insurers accept a dated, photographed audit report as proof of maintenance. Building managers file the report alongside fire safety and electrical compliance records.
Related Links
Essential Guide to Salto System AuditingChoosing the Right Audit Process for Salto
Top Tips for Conducting Audits for Salto in Perth
The Cost of Salto System Audits: What to Expect
Common Causes of Audit Failures in Salto Systems
Common Signs You Need a Salto System Audit