What to Expect During Your Salto Upgrade Process

Table Of Contents


What Happens During a Salto Upgrade Process?

The Salto upgrade process follows six clear stages from first contact to final handover. A technician begins the Salto upgrade process with a site inspection of every access-controlled door. The inspection records door types, reader locations, controller positions and cable routes. The technician then drafts an upgrade plan showing the new hardware layout for each entrance. Hardware installation follows the plan, with old Salto components removed door by door. The technician fits new readers, controllers and escutcheons during the Salto upgrade process. Software configuration comes next, with user credentials transferred to the new Salto platform. The technician enrols each user card or mobile key in the updated system. Testing follows configuration, with every reader, door release and override checked individually. The final stage is a handover meeting, where the technician demonstrates the upgraded Salto system and answers your questions.
Documentation forms part of the Salto upgrade process from the first visit onward. The technician records serial numbers, door schedules and credential counts in an upgrade report. The report lists any doors that need extra work, such as strike replacements or cable repairs. You receive a copy of the report before installation starts, so the scope stays clear. During installation, the technician logs progress against the plan at the end of each day. The daily log shows which doors are complete, which doors remain and any delays found. You receive a completion certificate once every door passes testing under the Salto upgrade process. The certificate records firmware versions, credential numbers and warranty dates for the new hardware. Keep the certificate with your building records, as insurers and auditors sometimes request Salto documentation.

How Long Does a Salto Upgrade Take?

A Salto upgrade takes between one day and three weeks depending on door numbers and site complexity. A single door with a like-for-like Salto reader swap takes about two hours. A small office with ten doors takes one to two days under a standard Salto upgrade timeline. A multi-storey building with fifty doors takes one to two weeks of scheduled work. A large campus with hundreds of doors takes three weeks or more, planned in stages. The Salto upgrade duration also depends on door hardware condition, because worn locks need replacement first. Cable availability affects the timeline, as doors without suitable wiring need new cable runs. Software migration adds time, because credential databases need careful transfer and verification.
You receive a written timeline before the Salto upgrade process starts. The timeline lists each stage, the doors covered and the expected finish date. The technician builds the schedule around your trading hours, so business disruption stays low. After-hours installation suits offices, retail sites and clinics that trade during the day. Door-by-door scheduling keeps part of your access control active while the upgrade proceeds. The technician confirms arrival times one day before each scheduled visit. Weather rarely affects indoor Salto work, though external gates need dry conditions. The timeline includes a buffer for unexpected door faults found during installation. You receive updates if any stage moves, along with a revised finish date for the Salto upgrade.

The Salto Site Assessment Stage

The Salto site assessment stage is the first working visit of the Salto upgrade process. A technician walks the site during the Salto site assessment stage and inspects every access point. The technician checks door frames, strike plates, reader positions and controller mounting spaces. The assessment records existing wiring paths and notes doors that need new cabling. The technician photographs each door, so the upgrade plan matches the real site conditions. Network coverage gets tested at every controller location during the Salto site assessment stage. The technician confirms power availability, as Salto controllers need a stable supply near each door. The assessment also maps user traffic flows, identifying entrances that need hands-free or high-traffic readers. You receive a written assessment summary within a few days of the visit.
The assessment summary shapes every later stage of the Salto upgrade process. The summary lists each door with a recommended reader type, controller model and wiring action. The technician flags doors with hardware faults during the Salto site assessment stage, so repairs join the plan. The summary includes a draft schedule showing which doors get upgraded first. High-priority doors, such as main entrances and server rooms, appear early in the schedule. Low-risk internal doors appear later, keeping disruption away from busy areas. You review the summary and confirm priorities before hardware ordering starts. The technician orders components against the confirmed summary, which prevents delays during installation. The Salto site assessment stage therefore sets the scope, the schedule and the budget for the whole upgrade.

Why Do Technicians Test Doors Before a Salto Upgrade?

Technicians test doors before a Salto upgrade to confirm every door works with new hardware. Testing doors before a Salto upgrade reveals worn locks, weak strikes and misaligned latches. A worn lock fails early under a new reader, causing call-backs after the upgrade. The technician measures door gaps and hinge wear during the pre-upgrade door test. A door that drags on the frame needs adjustment before a Salto escutcheon goes on. The technician tests the electric strike or magnetic lock on each door. A failing release unit gets replaced during the upgrade, not after. The technician also tests the door position sensor, which reports open and closed states to the Salto software. A faulty sensor gives false alarms on the new platform, so the sensor gets checked early.
Testing doors before a Salto upgrade also protects your project budget and schedule. The pre-upgrade test produces a door-by-door condition report with photos and measurements. The report separates important repairs from optional improvements, so you approve costs with full information. The technician identifies doors needing cable runs during the same test visit, avoiding a second inspection. The test confirms network signal strength at each controller point, which prevents connectivity surprises. The technician records fire door compliance details, because fire-rated doors need certified hardware during a Salto upgrade. The condition report becomes an appendix to the upgrade plan, giving installers exact instructions per door. Testing doors before a Salto upgrade therefore removes guesswork, keeps the timeline honest and prevents mid-project cost changes.

What Happens After Your Salto Upgrade Completes?

After your Salto upgrade completes, the technician runs a full system commissioning test across every door. The commissioning test after a Salto upgrade covers reader response, door release times and event logging. The technician presents a test card at each reader and confirms the door releases correctly. The technician checks the software dashboard, confirming every controller reports online status. Event logs get reviewed, with each access event matched against a real test action. The technician tests power failover, confirming battery backup holds each door in a safe state. The technician verifies the fire alarm interface, confirming emergency release works on every monitored door. You receive a walkthrough of the upgraded Salto system once the commissioning test passes. The walkthrough covers daily tasks such as adding users, cancelling lost cards and running reports.
Support arrangements begin after your Salto upgrade completes, giving you a clear service path. The technician registers your new Salto hardware for warranty and records the start dates. You receive a support schedule covering routine maintenance visits, firmware checks and battery inspections. The first maintenance visit usually falls three months after the Salto upgrade completion date. The technician sets up remote monitoring where your site supports it, so faults get flagged early. You receive login access to the Salto management software, with administrator rights set to named staff. The technician archives the old system data, keeping historical access records available for audits. A completion pack arrives with user guides, network diagrams and the commissioning test results. Keep the completion pack safe, as the documents support warranty claims and future upgrades.

Salto Staff Training on Upgrade Day

Salto staff training on upgrade day happens at the end of the installation visit. The technician delivers Salto staff training on upgrade day in a short session at your premises. The session covers the management software, showing how to add users, edit access groups and run reports. The technician demonstrates card issuance, showing each step from enrolment to printing. Staff practise issuing a card during the Salto staff training on upgrade day. The technician demonstrates mobile key setup, showing staff how the Salto app enrols a phone. The session covers lost card handling, showing the deactivation steps that block a missing credential instantly. Staff learn the door override procedure, which grants entry during a power or network fault. The technician leaves printed quick-reference guides at the reception desk after the session.
Follow-up support strengthens Salto staff training on upgrade day once the technician leaves the site. The technician offers a check-in call one week after the Salto staff training on upgrade day. The check-in call answers questions that surface once staff use the system daily. A second short visit suits larger sites, where multiple shifts need the same training. The technician records attendance at each session, so you know which staff members completed training. New staff members receive the same session through a ref visit booked with the service team. The technician updates the training guide whenever Salto software releases change the interface. Recorded demonstrations suit sites with high staff turnover, giving new hires instant access to instructions. Salto staff training on upgrade day therefore leaves every authorised user confident with the new platform.

FAQS

Do I need to close my business during a Salto upgrade?

You do not need to close your business during a Salto upgrade. The technician schedules work door by door, so other entrances stay active. After-hours installation suits sites that trade during the day. You keep partial access control running throughout the project.

What happens to my existing user cards during a Salto upgrade?

Existing user cards get transferred or replaced during a Salto upgrade, depending on the new platform version. The technician migrates the credential database first, then tests a sample of cards at each reader. Cards that fail the test get re-enrolled on upgrade day at no extra delay.

Can I upgrade part of my Salto system instead of the whole site?

You can upgrade part of your Salto system in staged phases. The technician plans each phase around door priority, upgrading main entrances and secure areas first. Staged upgrades suit large sites with limited budgets. The assessment stage maps which doors belong in each phase.

What data gets lost during a Salto system upgrade?

No access history gets lost during a properly managed Salto system upgrade. The technician archives the old credential database and event logs before migration begins. The archived records stay available for audits after the upgrade. The technician verifies the migrated data against the archive before handover.

Who attends the site during a Salto upgrade process?

A licensed technician attends the site during the Salto upgrade process, supported by a second installer on multi-door stages. The lead technician handles assessment, configuration and commissioning. The same lead technician stays assigned to your project from start to finish, so you deal with one familiar contact.


Related Links

Signs You Need to Upgrade Your Salto System
How to Prepare for a Salto System Upgrade
Common Causes of Salto System Malfunctions
Top Tips for Upgrading Salto Systems in Perth
Choosing the Right Components for Salto Upgrades
Essential Guide to Salto System Upgrades
The Cost of Salto System Upgrades: What to Expect
Understanding the Importance of System Upgrades
Benefits of Salto System Upgrades for Businesses in Perth